Two (2) Replacement Main Rotors for Mini Infrared Remote Control Electric

At our site, you will discover Two (2) Replacement Main Rotors for Mini Infrared Remote Control Electric Helicopters available at our low prices. Shop now for this item and anything else we have available at our affordable prices.

Product Description

Includes bonus YELLOW tail propeller. This is a set of 2 replacement main drive rotor blade sets for the Mini Heli Infrared Indoor Helicopter, Bell Heli IR Indoor RC Helicopter, Picco Z, Havoc Heli and clones. Each heli requires 1 set. It is a good idea to keep a spare rotor on hand to let you keep flying in case yours is damaged in a crash. If you lose the little silver weights in the top stabilizer you'll need to purchase a new rotor blade. Main Rotor Blade Specifications: Rotor Diameter: 5.2" (13.2cm) Material: Flexible black plastic Features: Integrated stabilizer (top hinged portion) This Main Rotor Blade Is Compatible With: Mini IR Helis ; Mini Bell IR Heli, Spin Master Air Hogs Havoc Helis, Silverlit Picco Z, Clones like PiccoZ, PicooZ, etc...

Product Ads from External Websites(What's this?)
Sponsored Content
Page 1 of 3 (Start Over)

plastic parts of shaft Part 9109
$3.50
No Shipping Info
XHeli


Main Rotor Blades V2
$7.00
No Shipping Info
XHeli


Syma S022 Helicopter Replacement Parts (COME WITH REMOTE)
$19.95
No Shipping Info
XHeli

See a problem with these advertisements?Let us know
Advertise here
List Price : $14.99
Price : $6.17
You Save : $8.82 (59%)

Product Details

• Product Dimensions: 6 x 3.9 x 1 inches ; 0.3 ounces


• Shipping Weight: 8 ounces (View shipping rates and policies)


• ASIN: B000RK43FG


• Item model number: GEN-002A


• Manufacturer recommended age: 13 years and up


• Amazon Best Sellers Rank: 1,783 in Toys ; Games (See Top 100 in Toys ; Games)


• 8 inToys ; Games Hobbies Radio Control Parts
  

Product Features

• Two main helicopter rotor blades - Black


• Includes bonus YELLOW tail propeller.


• Fits air hogs havoc heli, havoc stinger, venom micro ranger, picooz, and brandmates


• Keep your favorite micro helis flying

List Price : $14.99
Price : $6.17
You Save : $8.82 (59%)

Customer Reviews

I bought this as a replacement for a Yiboo mini Euro Tiger Airsquire, which broke one of the connecting arms between the main rotor and stabilizing bar. These new rotors have a slightly different stabilizer - it has more of a wing profile than the original type. I wasn't sure if they would work but for $4 what is there to lose?
Once fitted, the helicopter flies a lot a better than it ever did before! It is much more stable and doesn't veer off into the wall when attempting to take off (which is what broke my original rotor). Some reviewers here said that their models would not fly any more because of the weight of the new rotors, but the Yiboo is OK.
No instructions came with the new rotors so here's what worked for me (For the Yiboo anyway). Getting the old rotor off is not easy! If the old rotor will not simply pull off:
Cut across the plastic shaft of the old rotor just below the stabilizer bar, and above the tell tale hole with wire cutters or similar. You can now remove the stabilzer and main rotor. Don't cut any lower as you'll cut through the metal drive shaft. This leaves the plastic shaft which is part of the rotor around an inner metal shaft which conencts to the drive motor. You must be careful not to bend or damage the metal shaft.
Cut along the length of the remaining plastic shaft with a craft knife. It takes several cuts to get through. I made two cuts 180 degrees apart. Be careful not to cut yourself! You can now peel the two halves of the remains of the plastic shaft away from the metal inner shaft. I couldn't get all the way to the end of the plastic as it was within the body of the helicopter. Cutting as far down as I could, and peeling away released the plastic part from the metal shaft and I was able to pull the remains of plastic away from the metal inner shaft. This method completely destroys the old rotor of course, but I'm assuming you're replacing it because it is already damaged.
The new rotor just pushed onto the shaft quite easily. I used washing up liquid to ease it on and the pressure of my finger and thumb was sufficient. You know it is on far enough when you can see the metal inner shaft through the tell tale hole.
I can't guarantee that this method will work for all brands of Electric Helicopter, but it may provide some tips. Good luck and happy flying.

This is the correct part if you have a PicooZ/Air Hog Havoc 2-ch heli.
Make sure that the rotor fits snugly, because a loose fit will not provide adequate lift to get your heli up and running even though the rotors seem to spin . You also have to adjust trim and make sure that the tail rotor is clean of wrapped hair or fuzz, and perfectly perpendicular to the main rotor- these are essential for proper functioning of the heli, and typically have to be checked/adjusted after each crash.
This replacement is definitely sturdier than the original rotor, as well as the single spare that came with the original heli.
This product has restored my little heli to full function and made me a happy little child again, much to my wife's chagrin.